ISSN   1004-0595

CN  62-1224/O4

高级检索
TiC—Fe3C对铸铁激光熔敷层耐磨性的影响[J]. 摩擦学学报, 2002, 22(5): 339-342.
引用本文: TiC—Fe3C对铸铁激光熔敷层耐磨性的影响[J]. 摩擦学学报, 2002, 22(5): 339-342.
The Effect of TiC-Fe3C on the Wear Resistance of Laser Cladding Layers in Grey Iron[J]. TRIBOLOGY, 2002, 22(5): 339-342.
Citation: The Effect of TiC-Fe3C on the Wear Resistance of Laser Cladding Layers in Grey Iron[J]. TRIBOLOGY, 2002, 22(5): 339-342.

TiC—Fe3C对铸铁激光熔敷层耐磨性的影响

The Effect of TiC-Fe3C on the Wear Resistance of Laser Cladding Layers in Grey Iron

  • 摘要: 采用铁基熔敷材料 ,在铸铁激光熔敷层内得到内生 Ti C.研究了内生 Ti C和 Fe3 C对熔敷层耐磨性的影响 ,分析了内生 Ti C数量及体积分数对熔敷层磨损表面形貌及磨损质量损失的影响规律 .结果表明 ,通过引入内生 Ti C可以显著改善铸铁表面激光熔敷层的抗磨性能 ,这主要是由于 Ti C硬度很高 ,且具有弥散强化及细晶强化作用所致

     

    Abstract: Endogenous TiC was prepared in the cladding layer of grey cast iron with iron-based cladding materials. The effect of endogenous TiC and Fe 3C on the wear resistance of the cladding layer was investigated. As the results, the iron-based cladding material doped with Ti contributed to improve the wear resistance of the cladding layer considerably. This was mainly attributed to the formation of the TiC phase with extremely high hardness and the dispersive strengthening and fine-crystallite strengthening function of the endogenous TiC phase.

     

/

返回文章
返回