ISSN   1004-0595

CN  62-1224/O4

高级检索
水溶性烷基硫代磷酸锌在钢球磨斑表面形成的润滑薄膜的分析研究[J]. 摩擦学学报, 1998, 18(1): 75-79.
引用本文: 水溶性烷基硫代磷酸锌在钢球磨斑表面形成的润滑薄膜的分析研究[J]. 摩擦学学报, 1998, 18(1): 75-79.
Study on Lubricating Thin Film of Water soluble Lubricant Formed in Worn Surface of Four ball Test[J]. TRIBOLOGY, 1998, 18(1): 75-79.
Citation: Study on Lubricating Thin Film of Water soluble Lubricant Formed in Worn Surface of Four ball Test[J]. TRIBOLOGY, 1998, 18(1): 75-79.

水溶性烷基硫代磷酸锌在钢球磨斑表面形成的润滑薄膜的分析研究

Study on Lubricating Thin Film of Water soluble Lubricant Formed in Worn Surface of Four ball Test

  • 摘要: 用扫描电子显微镜、电子探针和扫描隧道显微镜对水溶性烷基硫代磷酸锌在四球试验中于钢球磨斑表面形成的润滑膜进行了分析研究.结果表明:这种膜为非晶态,元素P和Zn的含量都较高,且在膜中均显示出明显的偏析现象,二者的富集位置相同,而元素S在膜中的分布比较均匀;这种润滑膜系多层膜,每层膜的厚度约为500nm,润滑膜的平均直径约为15000nm.

     

    Abstract: Lubricating thin film of water soluble zinc alkyl thiophosphate formed in worn surface of four ball test has been studied by means of scanning electronic microsope, electronic probe analysis and scanning tunneling microscope. The results indicate that the film is non crystalline with high but almost the same content of elements P and Zn in some areas but dis well distributed S in the while wear scar. SEM and TEM analyses show that the lubricating film is a multi layer film with the thickness of each layer of about 500 nm, while the average dimension of the lubricating film is 15 000 nm or so.

     

/

返回文章
返回