ISSN   1004-0595

CN  62-1095/O4

高级检索
氮及钛等离子体基离子注入铝合金表面改性层的摩擦磨损性能研究[J]. 摩擦学学报, 2001, 21(1): 10-14.
引用本文: 氮及钛等离子体基离子注入铝合金表面改性层的摩擦磨损性能研究[J]. 摩擦学学报, 2001, 21(1): 10-14.
Friction and Wear Behavior of the Modified Layer of Aluminum Alloy Implanted with Nitrogen and Titanium by Plasma Source Ion Implantation[J]. TRIBOLOGY, 2001, 21(1): 10-14.
Citation: Friction and Wear Behavior of the Modified Layer of Aluminum Alloy Implanted with Nitrogen and Titanium by Plasma Source Ion Implantation[J]. TRIBOLOGY, 2001, 21(1): 10-14.

氮及钛等离子体基离子注入铝合金表面改性层的摩擦磨损性能研究

Friction and Wear Behavior of the Modified Layer of Aluminum Alloy Implanted with Nitrogen and Titanium by Plasma Source Ion Implantation

  • 摘要: 研究了铝合金LY12等离子体基氮及钛离子注入层的摩擦磨损性能。用X射线光电子能谱和小掠射角X射线衍射对改性层中各元素分布及相组成进行了分析。用扫描电子显微镜对注入层形貌进行了观察和分析。结果表明:注入层由TiN、α-Ti、AlN、Al2O3和TiO2等相组成;注入后试样硬度提高了1倍以上;在低载荷下,摩擦系数处于0.10-0.14之间,注入层寿命提高了12倍以上,耐磨性提高了100倍以上;随着滑动载中增加,摩擦系数有所增大,而磨性有所降低;在注入层被磨穿以前以剥层磨损为主并伴有轻微的划伤,在注入层被磨穿以后以粘着磨损为主并伴有犁沟和粘着转移。注入改性层具有适当的梯度结构是提高铝事金表面硬度和耐磨性的主要原因。

     

/

返回文章
返回