ISSN   1004-0595

CN  62-1095/O4

高级检索
申龙章, 樊瑜瑾. 往复滑动摩擦副的消振减磨研究及其机理分析[J]. 摩擦学学报, 2012, 32(2): 157-164.
引用本文: 申龙章, 樊瑜瑾. 往复滑动摩擦副的消振减磨研究及其机理分析[J]. 摩擦学学报, 2012, 32(2): 157-164.
SHEN Long-zhang, FAN Yu-jin. Reducing Vibration for Anti-wear and Wear Mechanism of Reciprocating Sliding Frictional Pair[J]. TRIBOLOGY, 2012, 32(2): 157-164.
Citation: SHEN Long-zhang, FAN Yu-jin. Reducing Vibration for Anti-wear and Wear Mechanism of Reciprocating Sliding Frictional Pair[J]. TRIBOLOGY, 2012, 32(2): 157-164.

往复滑动摩擦副的消振减磨研究及其机理分析

Reducing Vibration for Anti-wear and Wear Mechanism of Reciprocating Sliding Frictional Pair

  • 摘要: 应用惠更斯原理设计了球-块主动消振式往复滑动摩擦磨损试验机,摩擦副运行过程无系统冲击,通过对比试验得出消振装置能有效消除往复滑动过程中两表面微凸体冲击所形成的摩擦振动,从而使得往复滑动过程中的磨损量和切削磨粒得以减少.从摩擦热力学的角度认为摩擦功可通过外界施加信号主动转换为热能,并分析了摩擦振动与其他磨损影响因素的相关性.

     

    Abstract: A reciprocating sliding tribo-meter with a block-on-ball configuration and active vibration reducing function is designed and manufactured based on Huygens principle. The frictional pair can run with and without system shock. By doing so, it can be learnt that vibration reducing device can effectively reduce the friction-induced vibration produced by shocking of the contacting asperities. It can reduce wear of the frictional pair and abrasive particles. Base on the viewpoint of tribo- thermodynamics, frictional power can be converted to frictional heat by the external active signal. The correlation between friction-induced vibration and other wear mechanisms is discussed.

     

/

返回文章
返回